 |
Refit
1701-A P/E Detail Set
This Photo Etched set is for use with the Polar Lights 1:350 scale U.S.S. Enterprise 1701-A model kit.
This is the original designed parts made for Polar Lights during the conception of the plastic kit. You cannot get any more accurate than this!
Item #PNT-4546
$50.00 - Out of Stock
|
 |
Lower Sensor Array
This is a resin replacement part for use with any issue of the original 18" Classic U.S.S. Enterprise model kit.
This array replaces the original part in the plastic kit with an accurate part.
Item #PNT-4004
$3.00
|
 |
Hydro Intake Grills
These all resin accessory parts are for use with any issue of the original 18" Classic U.S.S. Enterprise model kit.
These forward nacelle dome caps replace the dome parts in the plastic kit to represent a Bussard Collector that is of post-TOS and pre-movie design.
Item #PNT-4006
$5.00
|
 |
Destroyer Bridge
This is a Destroyer style bridge for those of you who kitbash any issue of the original 18" Classic U.S.S. Enterprise model into a single nacelled vessel.
Of course you could place it on your customized U.S.S. Enterprise kit too.
Item #PNT-4007
$3.00
|
 |
Scout Bridge
This is a Scout style bridge for those of you who kitbash any issue of the original 18" Classic U.S.S. Enterprise model into a single nacelled vessel.
Of course you could place it on your customized U.S.S. Enterprise kit too.
Item #PNT-4008
$3.00
|
 |
Aft Cap 1
These all resin accessory parts are needed to modify any issue of the original 18" Classic U.S.S. Enterprise
model kit into the pilot version Enterprise as seen in the first pilot film "The Cage".
Item #PNT-4013
$4.00
|
 |
Aft Cap 2
These all resin accessory parts are needed to modify any issue of the original 18" Classic U.S.S. Enterprise model kit into the pilot version
Enterprise as seen in the second pilot film "Where No Man...".
Item #PNT-4014
$4.00
|
 |
Trek V Shuttles
These 1:537 scale Shuttlecraft will fit any of the AMT/Ertl Movie Era 1701/1701-A, Reliant, or other style starships.
These shuttles fit our Saucer Mounted Shuttle Bay and the Miranda Class Shuttlebay (RMC-22). Decals for both shuttles are included.
Item #PNT-4503
$10.00
|
 |
Custom Bridge Module
Add a custom resin Bridge to your modified starship builds or conversions to make your design unique.
Designed for any issue of the AMT/Ertl 1:537 scale Movie Era 1701, 1701-A, or Reliant.
Item #PNT-4504
$4.00
|
 |
Saucer Mounted Shuttle Bay
This four piece resin assembly will fit any issue of the AMT/Ertl 1:537 scale Movie Era 1701, 1701-A, or Reliant upper saucer.
Use on your modified starship builds or conversions to add a unique feature. Decals are provided, from the Jackills Starfleet Data Sheets!
Item #PNT-4506
$18.00
|
 |
Split Impulse Engine Deck
These 4 resin parts replace the Impulse Deck on any version of the AMT/Ertl Movie Era 1701 or 1701-A for customizing your starship.
Item #PNT-4507
$15.00
|
 |
Lower Saucer Sensor Array
This custom array works great with the Lower Saucer Mounted Navigational Deflector or by itself.
Fits any issue of the AMT/Ertl 22" long Movie Era 1701 or 1701-A model kits.
Item #PNT-4508
$4.00
|
 |
STVI V.I.P. Lounge
This two piece all resin modification part will fit any issue of the AMT/Ertl 22" long Movie Era 1701 or 1701-A to model the VIP Lounge as seen in Trek VI.
It also fits great into our B/C Deck Housing too!
Item #PNT-4509
$5.00
|
 |
Abbe Bridge
Use this resin Bridge for customizing your starship! Fits any issue of the AMT/Ertl 22" long Movie Era 1701 or 1701-A.
Item #PNT-4511
$5.00
|
 |
B/C Deck Housing
This one piece all resin modification part will fit any issue of the AMT/Ertl 22" long Movie Era 1701 or 1701-A to add a more authentic look to the shape of the structure on the upper saucer.
Item #PNT-4512
$8.50
|
 |
Lower Saucer Mounted Navigational Deflector
Our original deflector configuration fits into the lower half of the saucer of any issue of the AMT/Ertl 22" long Movie Era 1701 or 1701-A model kits.
This two piece conversion part includes the deflector housing plus the elliptical shaped deflector dish.
Item #PNT-4515
$14.00
|
|
Excelsior Neck
Add a more accurate look to your Excelsior Class starship with this replacement!
This resin part is for any issue of the 1:1000 scale AMT/Ertl Excelsior or 1701-B model kits.
This conversion part is not representative of the NX-2000 version.
Item #PNT-5001
$15.00
|